Cetop5 Manifold Subplate Normal Flow SP10SN Series

Cetop5 Manifold Subplate Normal Flow SP10SN Series
Width= 101.60mmx79.50mmx31.75mm

Threaded Connection Ports = BSPPG1/2, NPT1/2 ; 3/4-16 SAE-8
The series of SP10SN is the type Cetop 5 side NFPA entry normal flow manifold subplate for mounting standard valve with ISO4401 pattern.The Cetop 5 manifold subplate mounting flange should reach the surface roughness Ra0.4, the sealing surface of the end piece should reach the surface roughness Ra3.2. In addition, installing the screw with the outer surface of the vertical degree of tolerance should be at least 8. All holes should be on the block valve machining accuracy, the general election 7H, also have dimensional tolerances and geometric tolerances. 0 -ring groove in the surface roughness Ra3.2, the general flow of the surface roughness of Ra12.5.
Product Code:
S/A SP10SN B/N/S Series
Product Description:
For size10mm directional control valve of Rexroth/ Vickers/ Parker hydraulic valve, with normal flow rate
Raw Materials:
High strength of steel 45# carbon steel
Working Pressure:
Steel 600bar/8700psi
Valve Pattern:
ISO no./ 4401-05-04 series; Rexroth /WE10 series ; Bosch/FD4-**HS-*02 series; Continental/ ED05M V*12M series; Denison/A-3D02 series; Nachi/ SS-G03, DMA-G03 series; Parker/ D3W; Vickers/ DG4S*-01, DG4V-4, (K)DG4V-5 series
Available Medium:
For 32# or 46# mineral hydraulic oil, phosphate hydraulic oil
Medium viscosity and cleanliness:
2.8-500 mm2/s, NAS1639, class9
Surface Treatment:
Black galvanized as usual treatment, please contact us for special
Minimum Order Quantity:
20PCS.
Package:
With strong wooden box or cartons for exporting sea shipment
Delivery:
Depends on the quantity and standard or custom design, usually 5-12 working days
Cetop5 Manifold Subplate Normal Flow SP10SN Series Ordering Code & Dimensions:
Cetop5 Manifold Subplate Normal Flow SP10SN Series Ordering Code & Dimensions Cetop5 Manifold Subplate Normal Flow SP10SN Series Dimension Form

 

Bookmark the permalink.

Comments are closed.